A lot of people agree that home improvement is in fact one of those continual tasks that we should keep on our list. As for any avid home improver, part of this list includes ensuring that you have the stainless steel sink that is in perfect condition.
Unlike other tasks, this case may actually call for extra labor or work. If you are still trying to figure out how to this by now, then follow these few, simple and fool-proof ways on how to install that new stainless steel sink in your kitchen.
Before you start worrying, let me assure you again that although it might sound complicated as it seems, all you need to do is follow these simple instructions. No need to fret, I will be making it as painless as possible. You'll be surprised that indeed, it's not rocket science to have that sink replaced.
Step One: Place the sink upside down on the countertop where you have decided to place it. You have to make sure that your stainless steel sink is parallel to the countertop edge of course. Check if your desired placement fits well given the other structures around it such as a cabinet. Why do you want to do this? It's because you'd like to start getting the right measures before you start working on things.
Step Two: Begin to trace. This is step one in taking measurements. Tracing allows you to place accurate marks which eventually you will use as reference for measurements. Trace the stainless steel sink on the countertop. Remove it and then make another line marking which 3/8" inside the first tracing mark line. This marking will be the cut lines for the whole where the stainless steel sink will be placed. The edges of the sink are expected to overlap with the edges of that of the outside markings. Check and draw these lines to ensure that they will perfectly fit before you actually carry on.
Step Three: Drilling will be next. Drill " hole roughly around 1" inside of the cut line with you drew. Make the holes bigger using a " bit. You may want to place a tape on the edges of the piece you are working on so that you don't end up scraping or having scratches on your countertop. Use to jigsaw blade and carefully start cutting out the stainless steel sink hole. Remember to keep the inside lines. Make sure that you cut out carefully to ensure good fit of your kitchen sink. Once cut, try putting your stainless steel sink to see if it fits well.
Step Four: Installation will be made easier and faster if you get the assistance of someone who can help you do this. This also prevents accidents both to you and your kitchen space. After testing how the sink fits, you may remove it again. Remember to make necessary adjustments should there be a need to do so. You may also want to prevent the sealant from smudging. You can easily do this by grasping the sink by the drain hole which is at the center of the stainless steel kitchen sink. Bring into line carefully and then press down to seat the sealant firmly.
Step Five: Be patient. This is already the last step. Fasten the sink from the under of the counter by making the clips tight. Bend the ends of the clips away from the rim of your stainless steel sink. This will pool the clips tight next to countertop. Remove any remnants of the sealant with the use of a cloth. Let it try as prescribed in the instructions. Once dried, you may connect this already to the water supply lines. Viola! You have just successfully installed your new kitchen sink.
For more information you can visit http://sinkdepot.net Eliza Maledevic Ayson writes for Jump2top.com - SEO Company
No comments:
Post a Comment